Why choose MANTA M8P/M4P Board?

1. It is especially friendly to makers using Klipper. The all-in-one board is a motherboard with integrated

dual cores. One core can be installed with traditional 3D printer firmware (Marlin), while the other

core is installed on the core board and can run Klipper firmware

2. It is also very friendly for novice users who want to use Klipper for the first time. You can directly use a

motherboard to achieve the functions you want.

Introduction

MANTA M4P:BIGTREETECH MANTA M4P is a 4-axis motherboard using a CM4 BTB header, which

can work with CB1 or CM4 perfectly.

1. DSI1, CSI1 interface (for CM4)

2. Gigabit Ethernet interface (1000M for CM4, 100M for CB1)

3. 3 USB 2.0 ports

4. Equipping the ESD protection chip on the USB and Ethernet ports to prevent being

broken down by the static electricity

5. When working with Raspberry Pi CM4, its 40pin pin header has the same function

as that of Raspberry Pi(Custom IO for CB1)

6. Using a BTB board-to-board connection, which can be further reinforced with

screws, perfectly compatible with CB1 or Raspberry Pi CM4

7. The MCU adopts STM32G0B0RE 32-bit ARM Cortex-M0+ @64MHz chip

8. The power chip adopts TPS5450-5A, which supports DC12/24V power input, the

output current of the chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of the core board

MANTA M8P 2.0:Microprocessor:ARM Cortex-M7 STM32H723ZET6 550MHz

MANTA M8P 1.0:

BIGTREETECH MANTA M8P motherboard is a 32-bit printer motherboard developed by Shenzhen Biqu Technology Co., Ltd. 3D printing team for Klipper firmware. Plug in the core board to run the Klipper firmware, which greatly simplifies the connection between the motherboard and the Raspberry Pi, and saves a lot of money. In the installation space in the chassis, the BTB seat is reserved on the motherboard, so that customers can choose to use CM4 or other solutions to solve the current expensive problem of CM4.

1. Adopt 32-bit main frequency 64MHz ARM Cortex-M0 series STM32G0B1VET6 main control chip;

2. The power supply chip adopts TPS5450-5A, which supports DC12/24V power input. The output current of the

chip is up to 5A, and the peak value is up to 6A, which perfectly supports the power supply of Raspberry Pi;

3. The motherboard reserves the BOOT button, and users can update the motherboard boot program through DFU;

4. The 24V, 12V, and 5V voltages of the CNC fans are optional, eliminating the need for the customer to operate an external transformer module, thereby reducing the chance of damage to the motherboard;

5. The thermistor can select the pull-up resistance value through the jumper, in this way, it supports PT1000 without external module, which is convenient for customers to use DIY;

6. MCU firmware can be upgraded through SD card, or MCU firmware can be updated through DFU through Klipper’s make flash command;

7. The main board and the core board use the BTB connection method, so that other core board solutions other than CM4 can be selected;

8. Support material break detection, shutdown, BLTouch, RGB lights and other functions

CB1:CB1 is a computing core board similar to Raspberry Pi CM4.

1. CPU: Allwinner H616, Quad-core Cortex-A53 @1.5GHz

2. GPU: Mali G31 MP2, support OpenGL3.2

3. RAM: 512MB/1GB DDR3L SDRAM

4. Display: HDMI2.0A interface, support 4K display

5. USB 2.0 port

6. 100M Ethernet + 100M WiFi

7. The same BTB header as the Raspberry Pi CM4

Note:

1. The CB1 couldn’t be connected to the PI TFT screen. The DSI/CSI port will only work while using CM4.

2. The PI4B should be used with CB1 or CM4 core board to run Klipper

BIGTREETECH Manta Boards

An Innovative and Easier Way to Run Your Klipper

BIGTREETECH Manta boards are born for Klipper running;they allow a direct installation ofthe BIGTREETECH CB1/Raspberry Pi CM4to run the Linux system, then the Klipper